Stepper Drive for PCB mounting12..42Vdc 0.3..2.4Apk

Technical Data

Power Supply Voltage: From 22Vdc up to 42Vdc
Phase current: From 0.3Apk up to 2.4Apk
Logic Supply Voltage: 5Vdc
Control Mode: Step and Direction
Digital Inputs: 5 TTL/CMOS compatible: STEP, DIRECTION, ENABLE, STANDBY, RESET
3 TTL/CMOS compatible: RS0, RS1, RS2 for the resolution setting
2 analog for the phase current setting
Digital Outputs: 1 open collector: FAULT
Step subdivision: Selectable from full step to 1/2 step
Protections, Alarms and Diagnostics: Over and under voltage, thermal, short circuit phase to phase, phase to ground, phase-positive
Connections: Via solder pins
Dimensions: 44.5(H) x 55(L) x 28.5(W) mm
1.75(H) x 2.17(L) x 1.12(W) inches
Weight: 120g 4.23oz