Stepper Drive for PCB mounting 22..85Vdc 1..7.5Apk

Technical Data

Power Supply Voltage: From 22Vdc up to 85Vdc
Phase current: From 1Apk up to 7.5Apk
Logic Supply Voltage: 5Vdc
Control Mode: Step and Direction
Digital Inputs: 5 TTL/CMOS compatible: STEP, DIRECTION, ENABLE, STANDBY, RESET
3 TTL/CMOS compatible: RS0, RS1, RS2 for the resolution setting
2 analog for the phase current setting
Digital Outputs: 1 open collector: FAULT
Step subdivision: Selectable from full step to 1/2 step
Protections, Alarms and Diagnostics: Over and under voltage, thermal, short circuit phase to phase, phase to ground, phase-positive
Connections: Via solder pins
Dimensions: 115.5(H) x 91(L) x 70(W) mm 4.55(H) x 3.58(L) x 2.76(W) inches
Weight: 390g 13.76oz